B680H 26 732719 - Rev.D
Translation of the original instructions
ENGLISH
Bar length
Installed
accessories
2 m 2,5 m 3 m 3,5 m 4m
4 m (with
coupling
)
4,5 m 5 m
5 m (with
coupling
)
No
accessories
123445666
Lights
12344566
Lights / Skirt
1245666
Lights / Foot /
Skirt
2346666
Lights / Foot
2335666
Foot
1235666
Skirt
1234666
Skirt/Foot
2345666
Table 2
Bar length
Installed accessories
5 m
(without
coupling)
5 m 5,5 m 6 m 6,5 m 7 m 7,5 m 8 m
No accessories
22334445
Lights
22334456
Lights / Skirt
2334456
Lights / Foot / Skirt
334456
Lights / Foot
23344566
Foot
23344456
Skirt
2334456
Skirt/Foot
333445
Table 3
12. BALANCING TABLES
The following two tables indicate the fixing position of the pistons on the rocker arm in relation to the length of the beam and the presence of
accessories secured to it, if any.
Table 2 refers to the balance spring for bar lengths equal to or shorter than 5 m and featuring a profile corresponding to the one in Fig. 8 on
page 26, ref.
햲 (“S” profile).
Table 3 refers to the balance spring for bar lengths equal to or longer than 5 m and featuring a profile corresponding to the one in Fig. 8 on
page 26, ref.
햳 (“L” profile).
Figure 30 contains the key for identifying the fixing holes based on the number indicated in the tables.
To Next Page
Loading...
