FAAC C720 - Page 21

8
ENGLISH
Display
F unction
Default 1
FO
MOTOR POWER:
Adjusts the motor power level
01 = minimum power
50 = maximum power
When the power value has been changed, it is advisable to perform a new
SETUP (see par. 7.3)
50
So
OPENING SPEED:
Adjusts the motor opening speed to 10 levels
0 1 = minimum speed
1 0 = maximum speed
When the speed value has been changed, it is advisable to perform a new
SETUP (see par. 7.3)
08
Sc
CLOSING SPEED:
Adjusts the motor closing speed to 10 levels.
0 1 = minimum speed
1 0 = maximum speed
When the speed value has been changed, it is advisable to perform a new
SETUP (see par. 7.3)
08
ro
SL OWING DURING OPENING
Adjusts the slowing space as a percentage of the total gate travel. Adjustable from 5 (with
speed <5), 10 (with speed between 5 and 8), 15 (with speed >8) to 99 % in 1% steps.
5- 10- 15 = minimum slowing
99 = maximum slowing
20
rc
SL OWING DURING CLOSING:
Adjusts the slowing space as a percentage of the total gate travel. Adjustable from 5 (with
speed <5), 10 (with speed between 5 and 8), 15 (with speed >8) to 99 % in 1% steps.
5- 10- 15 = minimum slowing
99 = maximum slowing
20
Sr
SPEED DURING SL OWING:
Adjusts gate speed during slowing .
0 = LOW speed
1 = HIGH speed
0
St
STATUS OF AUTOMATED SYSTEM:
Exit from programming, data storage, and return to gate status display .
00 = CLOSED 07 = FAIL SAFE in progress
01 = OPEN 08 = BUS-2EASY device check in progress
02 = Stop then “OPEN” 09 = P reflashing then “OPEN”
03 = Stop then “ C L OSE” 10 = P reflashing then “ C L OSE”
04 = In “ P AUSE” 11 = OPEN in P artial Opening
05 = During opening stage 12 = in PAUSE P artial Opening
06 = During closing stage