1 GENERAL REMARKS 3
2 DESCRIPTION AND TECHNICAL SPECIFICATIONS 3
3 DIMENSIONS 4
4 ELECTRIC EQUIPMENT (standard system) 4
5 INSTALLATION OF AUTOMATED SYSTEM 4
5.1 PRELIMINARY CHECKS 4
5.2 MASONRY FOR FOUNDATION PLATE 5
5.3 MECHANICAL INSTALLATION 6
5.4 INSTALLING THE RACK 7
5.4.1 STEEL RACK TO WELD (Fig.11) 7
5.4.3 NYLON RACK TO SCREW (Fig. 13) 7
5.4.2 STEEL RACK TO SCREW (Fig. 12) 7
6 OPERATIONAL START-UP 8
6.1 ELECTRONIC BOARD CONNECTION 8
6.1.1 EARTHING 8
6.1.2 ELECTRONIC EQUIPMENT 8
6.2 POSITIONING OF LIMIT SWITCHES 9
7 TESTING THE AUTOMATED SYSTEM 9
8 OPERATOR RELEASE/LOCK 9
9 MAINTENANCE 10
10 REPAIR 10
11 ACCESSORIES 10
11.1 BATTERY KIT 10
11.2 RADIO MODULE 10
CONTENTS
2
To Next Page
Loading...
Need help?
General
