30
USE AND CARE INFORMATION
For Best Results
6WDUWWKH5DQJH+RRGVHYHUDOPLQXWHVEHIRUHFRRNLQJWRGHYHORSSURSHUDLUÀRZ$OORZWKH5DQJH+RRGWRRSHUDWHIRU
several minutes after cooking is complete to clear all smoke and odors from the kitchen.
S1
Button Function Led
Turns the lights on/off at maximum strength. -
Press and hold the button for approximately 2 seconds to turn the Dimmer
Lights On/Off.
-
Turns the motor on/off at speed one. ON
Delay function:
Press and hold the button for approx. 3 seconds to Activate/Deactivate the
Delay function (automatic switching off of the Motor, and the Lighting with a 30
min. delay). Cannot be enabled when Intensive is on.
Turns the Motor on at speed two. ON
Activate Charcoal Filter Alarm
Press and hold the button for approximately 5 seconds, with all the hood turned
RII0RWRUDQG/LJKWVWRWXUQWKHDODUPRQ7KHUHOHYDQW/('ÀDVKHVWZLFH
WRFRQ¿UP7RWXUQWKHDODUPRIISUHVVWKHEXWWRQDJDLQDQGKROGIRUDWOHDVW
VHFRQGV7KHUHOHYDQW/('ÀDVKHVRQFH
Turns the Motor on at speed three. ON
Grease Filter Alarm
To reset the alarm: press and hold the button for approximately 3 seconds, with
WKHKRRGWXUQHGRII0RWRUDQG/LJKWVDQGXQWLOWKH/('6ÀDVKHVWKUHHWLPHV
Turns the Motor on at INTENSIVE Speed.
This speed is timed to run for 6 minutes. At the end of this time, the system
returns automatically to the speed that was set before. If it is activated with the
motor turned off, the hood will switch to OFF at the end of the time.
ON
S1
Signals the Metal Grease Filter saturation alarm, indicating that it is necessary
WRZDVKWKH¿OWHUV7KHDODUPLVWULJJHUHGDIWHUWKH+RRGKDVEHHQLQRSHUDWLRQ
for 100 working hours.
ON
When this is activated, it signals:
7KH$FWLYDWHG&KDUFRDO)LOWHUVDWXUDWLRQDODUPLQGLFDWLQJWKDWWKH¿OWHUPXVWEH
changed;
The Metal Grease Filters must also be washed. The Activated Charcoal Filter
saturation alarm turns on after the Hood has been working for 200 hours.
Flashing.
To Next Page
Loading...
Need help?
General
