Faema BARCODE - Customer Programming Options; Customer Parameters Menu

CUSTOMER PROGRAMMING
16. Clock adjustment
17. Customer parameters menu
Use the "+" (30) and "-" (31) keys to adjust the clock.
The time increases (or decreases) one minute each time the
key is pressed.
If one of the keys (30 or 31) is pressed and held down for more
than 10 seconds, the minutes setting stops and the hours
setting increases (or decreases).
During the time setting phase, the seconds remain at "00".
10 March 2010
wednesday 15:15:04
To access "Customer parameters" press (34) key; the
following message will appear on the display:
 CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
DEUTSCH
FRANCAIS
+
u
u
 CUSTOMER PARAMETERS
SERVICE TIME
ITALIANO
ENGLISH
DEUTSCH
FRANCAIS
To display the messages in a different language from that set,
after entering into Programming mode, position the cursor
on the desired language by pressing the "+"
(30) and "-"
(31) keys and then pressing the PRG (29) key. The
machine will restart with the messages provided in the selected
language.
The display (5) provides a choice of the following languages.:
Italian, English, German, French, Polish, Spanish, Portuguese,
Dutch, Japanese and Russian.
+
u
u
Language selection
77
English