Faema BARCODE - Key Menu - Mixed Soluble Selection (Where Contemplated); Key Menu - Hot Water Selection; Key Menu - Steam Selection

Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The display appears as follows:
The following mixed soluble selection parameters can be
modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1);
- emulsion ((foamed milk dispensing time, 0 ÷ time set in
the milk dose);
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0 to
20 with increments of 0.1 seconds).
Press the hot water dispensing key (12dt). The following
message will appear on the display:
The following hot water selection parameters can be
modified:
- water dispensing time (from 0 to 60, with increments of
0.1 seconds).
KEY MENU
Type 1 mixed solub.
repetition 001
Milk dose 07.0
Emulsion 03.5
Cold milk dose 05.0
+
u
u
KEY MENU
Type water
dispens. time 20.0
+
u
u
Press the steam dispensing key (13dt). The following
message will appear on the display:
The following steam selection parameters can be modified:
- steam dispensing time (from 0 to 60, with increments of
0.1 seconds).
KEY MENU
Type steam
dispens. time 20.0
+
u
u
19.5 Key menu - Mixed soluble selection (where contemplated)
19.6 Key menu - Hot water selection
19.7 Key menu - Steam selection
82
English