Faema BARCODE - Data Menu: Counters and Accounting

18. DATA menu: COUNTERS
18.1 DATA menu: ACCOUNTING
Placing the cursor on the various selections, the led associated
to the key remains ignited:
Note: the total number and numbers of single selections
CANNOT be zeroed.
Access the DATA MENU, pressing the “i”
(27) key. The
following will be displayed:
Use the “+”
(30) and “-” (31) keys to position the cursor
on the COUNTER line, then press the PRG
(29) key. The
To access the various menus, position the cursor on the line
that interests you, using the “+” (30) or “-” (31) keys.
Press the PRG
(29) key and then press the “+” (30) or “-”
(31) keys to reset the number. The meter will be reset.
When the
key is pressed, zeroing is confermed.
Press the RES
(24) key to return to the main menu.
The total number of coffees and the number of cycles CANNOT
be zeroed.
The total number of grinding procedures recorded for the two
grinders (MM1 and MM2) can only be zeroed by the installer
technician when the grinders are replaced.
DATA MENU
COUNTERS MENU
ACCOUNTING
+
u
u
COUNTERS MENU
N° coffee 25
N° milk 15
N° solub. 1 12
N° solub. 2 10
N° water 10
+
u
u
Pressing again the PRG (29) key, on the display will appear
the number of all dispensings performed and the number of
dispensing for each selection key:
DATA MENU
COUNTERS MENU
ACCOUNTING
+
u
u
Use the “+” (30) and “-” (31) keys to position the cursor
on the ACCOUNTING line, then press the PRG
(29) key.
The following will appear on the display:
ACCOUNTING
COUNTERS MENU
+
u
u
COUNTERS MENU
Total: 125348
Sel. 01 40254
Sel. 02 32005
Sel. 03 10258
Sel. 04 9820
+
u
u
COUNTERS MENU
Total: 125348
Sel. 01 40254
Sel. 02 32005
Sel. 03 10258
Sel. 04 9820
+
u
u
COUNTERS MENU
Total: 125348
Sel. 01 40254
Sel. 02 32005
Sel. 03 10258
Sel. 04 9820
+
u
u
following will appear on the display:
79
English