Faema BARCODE - Key Menu - Cappuccino Selection; Key Menu - Milk Selection; Key Menu - Chocolate; Solubles Selection (Where Contemplated)

19.2 Key menu - Cappuccino selection
19.3 Key menu - Milk selection
19.4 Key menu - Chocolate / Solubles selection (where contemplated)
Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The following message will appear on the
display:
The following cappuccino selection parameters can be
modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1););
- emulsion ((foamed milk dispensing time, 0 ÷ time set in
the milk dose);
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0 to
20 with increments of 0.1 seconds);
- water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1);
- grinder (chosen between grinder MM1 or MM2);
- coffee dose... (coffee dose grinde ...impulses, 0 ÷ 200 with
increments of 1);
- water start (determines if the water must be added (before)
or (after) the coffee dispensing);
- Additional water (volumetric dosage pulses, from 0 to 999,
with increments of 1).
The components - * - are applied only in some produit
configurations
The dose setting for both grinders has a field range of + 5 of
the value set in the technical programming menu.
Example
technical programming customer programming
coffee dose MM1 045 coffee dose MM1 040÷050
coffee dose MM2 020 coffee dose MM2 015÷025
KEY MENU
Type 1 cappuccino
repetition 001
Milk dose 07.0
Emulsion 07.0
Cold milk dose 00.0
+
u
u
Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The display appears as follows:
The following cappuccino selection parameters can be modi-
fied:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099);
- milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1););
- emulsion ((foamed milk dispensing time, 0 ÷ time set in
the milk dose);
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0 to
20 with increments of 0.1 seconds).
Press one of the cappuccino dispensing keys (32) (the relative
led will remain on). The display appears as follows:
The following chocolate ( or other soluble beverage) selection
parameters can be modified:
- repetition (it represents the number of distributions of the
selected drink, from 001 to 099).
KEY MENU
Type 1 milk
repetition 001
Milk dose 07.0
Emulsion 07.0
Cold milk dose 00.0
+
u
u
KEY MENU
Type 1 chocolate
repetition 001
+
u
u
81
English