1 32
$
1 32
4 5
A
English
31 EN
Press the icon .
Press the icon
.
The following message will be
displayed: “WATER CHANGE”. The
water from the boiler will drain from
the hot-water nozzle (60 - 70% ca. of
the total capacity).
Dispensing will stop automatically.
After the procedure, the machine will
return to its normal functions and the
ERLOHUZLOOEHUH¿OOHGZLWKIUHVKZDWHU
CHANGING THE WATER IN THE BOILER - Procedure to carry out at least once a day
WATER CHANGE
$
FILTER-HOLDERS - 7KLVRSHUDWLRQPXVWEHPDGHRQDOOWKH¿OWHUKROGHUVDWWKHHQGRIHDFKZRUNLQJGD\
5HPRYHWKH¿OWHUVIURPWKH¿OWHUKROGHUV
6RDNWKH¿OWHUVDQGWKH¿OWHU
holders in this solution for
about 15 minutes.
NOTE! Only immerse the
metal parts.
3ODFHWKH¿OWHUVEDFNLQWKH¿OWHUKROGHUPDNLQJVXUHWKDW
the anchoring spring (ARIWKH¿OWHULVLQLWVVORW
Remove any residue with a non-abrasive sponge and rinse
well with running cold water.
Pour one litre of hot water
(122÷176°F; 50÷80°C) and
10 g of detergent powder,
equal to two teaspoons, in
a suitable container that is
neither aluminium nor iron.