Faema E71 - Steam Dispensing with Lever Control; Purge Function for Steam Wand; Modular Dispensing Levels; Cleaning Steam Dispensing Pipes

A
9
20
"Purge"
100%50%
English
(1
Steam dispensing with lever control (20)
Completely immerse the left (9) steam nozzle into the
container with the liquid to be heated and push the steam
control lever (20) upwards in the appropriate position.
Wait until the liquid has reached the desired temperature,
then lower the steam command lever to stop the issue of
steam.
Cleaning of steam dispensing pipes
At the conclusion of each steam dispensing phase:
- Using a clean sponge, wash with hot water removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as follows:
Turn the nozzle towards the cup tray and carefully activate steam dispensing at least once.
Scalding hazard! Use the appropriate
insulating devices (A) to move the water and
steam wands.
The steam lever offers some special features that make it extremely useful.
Modularity
Another valuable function offered by the steam lever is
modular dispensing.
When the steam lever is pushed upwards, there are 2
different positions for the lever, offering two different levels
of steam intensity:
SRVLWLRQ9KDOIZD\VWUHQJWKWRKHDWPHGLXP
VPDOODPRXQWVRIEHYHUDJHV
SRVLWLRQ9IXOO\XSVWUHQJWKIRUODUJHDPRXQWV
of beverages.
"Purge" function
One of the most interesting features is the "Purge" function,
which makes it possible to eliminate any condensation
that may have formed when a medium/long period of time
passes between steam dispensing.
To activate the "Purge" function, push the steam lever
towards the cup tray and keep it in this position for several
seconds. When the lever is released, it automatically returns
to the starting position.