Fagor BCSD-10D - Page 6

BCSD-6/116 Digital Brushless S ervo Drive system - Ref. 1809
Revision History
Date Revised Content Remark
2014-02
1. Remove 200V drives and motors BCSD-15AMA, BCSD-20AMA,
BCSD-30AMA, BCSD-50AMA, FBM-10ADA, FBM-15ADA, FBM-
20ADA, FBM-30ADA, FBM-50ADA.
2. Add 400V drives and motors BCSD-10DMA, BCSD-15DMA, BCSD-
20DMA, BCSD-30DMA, BCSD-50DMA, FBM-10DDA, FBM-
15DDA, FBM-20DDA, FBM-30DDA, FBM-50DDA.
2014-10
1. Change FBS-08ADA and FBS-10ADA motors to FBS-08ADB and
FBS-10ADB.
2. Change BSC-CS-XX and BSC-CA-XX cables to BSC-CS-XX-01 and
BSC-CA-XX-01.
2015-03 1. Dimension of FBS and FBM motors.
2015-06
1. All motors use absolute encoder.
2. Add alarm A25, A26, A27.
2016-01 1. Remove cable BSC-CA-XX-01, change to BSC-CA-XX-02.
2017-11
1. New driver software version, BCSD-XXXMA-01.
2. New motors, FBM-10/15/20DDB.
3. New power cable MPC-FBM-14-XX-01 and new feedback cable
EEC-FBM-A-XX-01 used for above new motors (because power
connector and feedback connector on new motors are different from
previous one).
4. Power cable and feedback cable add 20 m length specification.
5. Remove communication cable BSC-PC, change to BSC-PC-USB.