BCSD-70/116 Digital Brushless AC Servo Drive system - Ref. 1809
4.5.2. Servo Ready (/S-RDY) Output
Type Signal Name Connector Pin Number Setting Meaning
Output /S-RDY
CN1-9,CN1-10
(factory setting)
ON (low level) Servo is ready.
OFF (high level) Servo is not ready.
- This signal indicates that the servodrive received the servo ON signal and completed all preparations.
- It is output when there are no servo alarms and the main circuit power supply is turned ON.
To Next Page
Loading...