·4·
Hardware configuration
CNC 8065
(REF: 1404)
CHAPTER 8 OP-PANEL MODULE. OPERATOR PANEL WITH OR WITHOUT SPINDLE SPEED OVERRIDE
SELECTOR.
8.1 Hardware dimensions. .................................................................................................. 88
8.2 Dimensions and characteristics of the enclosure. ......................................................... 89
8.3 Elements (connectors). .................................................................................................. 90
CHAPTER 9 EMERGENCY BATTERY.
9.1 Battery dimensions. ...................................................................................................... 94
9.2 Connectors and connection. .......................................................................................... 95
9.3 Operation of the emergency battery. ............................................................................. 96
CHAPTER 10 BUS CAN (CANFAGOR/CANOPEN PROTOCOLS).
10.1 Identification of the modules at the bus. ........................................................................ 99
10.2 Type of CAN bus and baudrate. .................................................................................. 101
10.3 Selecting the baudrate for the CANopen bus. ............................................................. 102
10.4 Selecting the speed for the CANfagor bus. ................................................................. 104
CHAPTER 11 SERCOS BUS.
11.1 Module identification and connection........................................................................... 107
11.2 Data exchange via Sercos. .......................................................................................... 108
CHAPTER 12 MECHATROLINK BUS.
To Next Page
Loading...
