DC Servo Drive System Manual Ver: 0009
DC - 17/32
Motor-Drive set
Rated and peak torque
The characteristics of rated and peak torques of the motors are often limited by the current
capabilities of the Drive controlling them.
This table considers these possible limitations.
DCS-08 DRIVE DCS-14 DRIVE
Speed Stall Torque Peak Torque Stall Torque Peak Torque
MOTORS -rpm- -Nm- -Nm- -Nm- -Nm-
DCM21.40A 4000 1.12 3.8
DCM22.40A 4000 2 4 2.2 7
DCM23.25A 2500 3.1 6.8 3.1 12
DCM41.12A 1200 2.6 15.2
DCM41.20A 2000 2.5 8.5
DCM41.30A 3000 2.4 5.6
DCM42.12A 1200 4.6 15.2
DCM42.20A 2000 4.4 8.9 4.4 15.6
DCM42.30A 3000 4.2 10.6
DCM43.12A 1200 7.2 15.6 7.2 27.4
DCM43.20A 2000 7 16.2
DCM43.30A 3000 5.5 10.9
DCM51.12A 1200 9.5 28
DCM51.20A 2000 8.4 16.8
DCM52.12A 1200 12 28
To Next Page
Loading...
