9
2.3 USING THE APPLIANCE – AS A GRIDDLE
2.3.1 Before use, clean the appliance inside and out. See section 3.
2.3.2 Ensure the plug is fitted.
2.3.3 Power Neon (Red) will light when there is mains power to the appliance
2.3.4 Turn Temperature Control to Griddle Position (around 280
o
C).
2.3.5 Heat Demand Neon (Amber) will light as the heating elements heat the pan.
2.3.6 Heat Demand Neon (Amber) and the heating elements will turn off when the set
temperature is reached.
2.3.7 Reduce the temperature as needed for the cooking process.
NOTE: The FLEXI pan is fitted with a thermal safety device. This will stop the heating of the
pan if it becomes overheated. This appliance is designed to fail safe.
2.3.8 If the appliance unexpectedly turns off, the safety thermostat might have activated.
Call a qualified technician to carry out an investigation.
2.4 USING THE APPLIANCE – BOILING / BRAISING
2.4.1 Before use, clean the appliance inside and out. See section 3.
2.4.2 Ensure the plug is fitted.
2.4.3 Fill the pan with water / stock to desired level using the level gauge as a guide.
2.4.4 Set temperature control to the Constant Boil Position (around 215
o
C).
2.4.5 For a simmer set the Temperature Control to Simmer Position (around 165
o
C).
2.5 USING THE APPLIANCE – STEAMING
2.5.1 Before use, clean the appliance inside and out. See section 3.
2.5.2 Ensure the plug is fitted.
2.5.3 For a gentle steam fill the pan with water to the minimum mark on the Level Gauge.
2.5.4 Fit steaming trays into pan.
2.5.5 Set dial to the Steaming Position (around 115
o
C).
THIS APPLIANCE IS NOT DESIGNED FOR DEEP FRYING.
DEEP FRYING IN THIS APPLIANCE MAY LEAD TO FIRES.
To Next Page
Loading...
Need help?
General