Falcon Dominator Series User Manual

29
8.0 ACCESSORIES
8.1 STEAMING TRAY AND LID
8.1.1 Place steaming tray and lid into pan area and follow recommended operations from section 2.5.
9.0 FAULT FINDING
FAULT
POSSIBLE
CAUSES
REMEDY
USER
ENG
Unit will not turn
ON
No power to unit
Check mains power is
connected and turned on

Safety
Thermostat
activated
Overheating
Allow plate temperature
to cool below 300
o
C.
Reset safety stat as per
section 7.3.

Heating
elements will not
turn ON
Safety Thermostat
has tripped
Reset safety thermostat
as per section 7.3

Fuse has blown
Check Fuse behind
control panel (section
7.2.2) and replace as
necessary.

*ENG – Service engineer only

Falcon Dominator Series Specifications

General

Brand	Falcon
Model	Dominator Series
Category	Ranges
Language	English