Care and Cleaning
Do not use solvents to clean the front or back panel of the unit. A lightly damp (water only) cloth can be used. A soft
cloth is recommended as the Anti-Glare LCD screen(s) will scratch if rubbed with an abrasive material. DO NOT use
liquids around the unit and do not pour water, solvents or any other type of liquid on the unit. Yes, it is a “Liquid” Foot
Controller- but like most electronic devices, it is not tolerant of Liquids! Go figure.
Maintenance
Buttons: Periodically tighten the top nuts holding the 8, 12, or 24 buttons on the top of the unit. Normal use and
excessive wear and tear could loosen these nuts over time. DO NOT UNSCREW THE BUTTONS FROM THE TOP PANEL
FOR ANY REASON. Purposefully loosening the nuts from the buttons could cause damage and will require maintenance
from the inside of the device to tighten.
Installing Add-On Modules
Instructions will be included for the specific add-on module you purchased. NEVER PLUG OR UNPLUG an expansion
module or add-on to expansion port A or B without first removing power from all units. Please follow all other
installation steps as delivered with the add-on unit.
Product Support
I know, we don’t read user guides. In fact, in writing this user guide, it is assumed no one will read this very paragraph.
Kind of like asking if a tree makes noise when it falls and no one is around to hear it!
Should you have questions or issues, please start by referring to this user guide for basic operating information. Also,
check www.FAMCmusic.com for the latest firmware, user guide updates, video tutorials and access to the user forums.
If your questions are still unanswered, feel free to fill out a trouble ticket on the web and we will provide an answer as
soon as possible.
To Next Page
Loading...