Copy/Paste
Press to begin Copy/Paste. The first time pressed, you will see “(COPY)” on the screen. Use the
and buttons to select the new location. Press again to make a copy in the
new location (press to cancel the copy operation from continuing).
Editing the IA Slot Parameters
For the remaining IA Slot parameters to edit, use the and buttons to scroll
back and fourth between the settings available. Use the various other lighted buttons to process the editing of the
current parameter on the screen.
Press after each and every change you wish to keep, or it will not commit to memory and your
modification will be lost. Always save your changes prior to changing parameters.
Edit the full name following the User Guide section on “Editing Names”. The full name is used in certain menu
commands and is also displayed on the top of the LCD when a preset is active. If you plan to Sync the IA Slot to an
external device (such as an AXE-FX), then keep in mind that by selecting an Effect ID (explained below), it will
automatically store the name of the effect selected into the name. Therefore, don’t program the IA Slot name until
you’ve selected your effect. If you plan to change the name, do it afterwards.
To Next Page
Loading...