Utility Menu
, press until
, press
FIRMWARE LOADING
DO NOT USER THIS FEATURE IF YOU ARE PROCESSNG A NORMAL FIRMWARE UPGRADE VIA THE EDITOR. MAKE
SURE YOU ARE NOT IN THE MENU SYSTEM AND SELECT FIRMWARE LOAD FROM THE FILE MENU. IF YOU HAVE A
NEED TO UPGRADE VIA MIDI, THEN YOU WILL USE THIS FEATURE.
DO NOT UNPLUG THE LF+, PRESS ANY BUTTONS, OR DISCONNECT THE POWER DURING THIS PROCESS. YOU
COULD DAMAGE THE UNIT DURING THIS PROCESS IF POWER IS LOST. ALWAYS MAKE A BACKUP USING THE
MIDI DUMP FEATURE, OR VIA THE PC/MAC EDITOR PRIOR TO AN UPGRADE.
Firmware is provided from time to time via download from the website (www.FAMCmusic.com). When the controller is
powered up, a welcome screen will tell you the Model of hardware, along with the current version of firmware.
Compare this to the latest version available. If a newer version (greater firmware version #), then it is usually
recommended that you download the file and do a firmware upgrade.
To Next Page
Loading...