MODEL (12+) Firmware Version # (v1.68)
Press to let the controller prepare to receive and process a firmware update. Wait for:
Send firmware file via MIDI. If successfully read, it will automatically update the device and then restart itself.
EXTERNAL AUTO LOAD
This utility allows the automatic capture and programming of compatible external devices. For instance, if you are
using an AXE-FX Ultra or II, the LF+ controller can automatically grab preset names, Effects bypass states (IA Slot
Syncing), and more. This utility will walk you through the prompts to setup and process an auto load. MAKE SURE of
the following:
1. The attached device must have both MIDI IN and MIDI out connections made with the Liquid-Foot Controller.
2. Make sure the external device is set to send TUNER Sysex Data only (specifically no clock data is allowed
during programming)
3. Make sure to program your IA Slots with SYNC and SYNC EFFECT parameters set applicable
To Next Page
Loading...