FAMC Mini - Global Menu

To Next Page

To Previous Page

Global Menu

, press until

, press

This Parameter defines the time a button must be held to trigger

a 2

function (if defined). The Status 2 LED will blink every ½

second as reference. See the Editing Page section of the user

guide

Button delay defines a time delay between button presses.

The default settings provides an average delay. If you find the

controller does not process your multiple presses fast enough,

make the value lower. If the system is processing too fast,

increase this number.

Button Hold Time

01.0 Seconds

Button Delay

141

MAIN: [SEL] Function

Mode

MENU RIGHT

MAIN: [SEL] Function

Global

SELECT