Defines the Default Page to Load during Power-up, and will
also be used if a “GLOBAL PAGE” button is triggered.
Set to YES if you need to accept incoming MIDI commands to
change the controllers preset, or receive CC messages to
control IA triggers. This is not to be used for Syncing.
When set to YES, it will override individual Preset settings
and resend all of the IA’s messages each time a preset is
triggered.
Reference “IA Slots” section for details on grouping and this
feature. When set to Turn Active on 1
st
, the controller will
send the ON commands of an IA Slot prior to sending OFF
messages for any other IA Slots within the group. If set to
“Inactive off 1
st
”, the controller will first process the OFF
messages of the IA Slots the group is shutting off prior to
sending the ON messages of the IA Slot that triggered the
group processing.
While IA Slots each have individual color controls for their
ON, OFF, and BYPASS states, it maybe desirable to force all
BYPASS states to simply follow the color scheme defined for
the OFF state.
Default Page
01 |3 Pre + 6 IA
Group (Make/Break)
Turn Active On 1st
To Next Page
Loading...