By default, pressing B2 + B3 together will enter the menu
system. If you choose to disable this combination, then set this
parameter to Yes.
By default, pressing B10 + B11 on 12,12+,Pro+ (or B2 + B6 on
the JR+) together will enter the page selection menu. If you
choose to disable this combination, then set this parameter to
Yes.
By default, pressing B1 + B5 together will enter the Preset
selection system. If you choose to disable this combination,
then set this parameter to Yes.
For controllers that use LCD screens above each button, you
can set the behavior of the display. By default, all the
information related to the active feature on the button is
displayed using both LCD lines. If you set this parameter to
“2
nd
Func on 2
nd
Line”, then you will see the nickname of the
active function on the top line, and the name of the current
second function on the second line.
When using an IA-Slot set as Tap-Tempo, each press of the IA-
Slot will display the delay time in the main LCD. You can use
this parameter to set the displayed time. The default “Show
Actual Value” will display the time between the last two
presses. Setting this parameter to “Show Average Value” will
Button LCD Line2
Active Func Displays
Tap Tempo Display
Show Actual Value
To Next Page
Loading...