ENGLISH
14 / 73
1.7 HDD Format
For users who wish to install a new SATA HDD into the player, please follow
the format procedure before usage.
- Step 1: Select OK on the Warning page, then press ENTER to confirm.
Note: This procedure can be started via Setup->System->HDD Format, too.
- Step 2: Press the up / down button to adjust the capacity of time shift
buffer.
Press the left / right button to select Next, and the enter button to confirm.
- Step 3: Select Format, press ENTER, and then hard disk format will start.
The formatting procedure will take a few minutes. After that you can use the
hard disk properly as a HDD recorder, player or external storage device.
Note: The HDD format will remove all data stored on the hard disk drive.
Please take care and backup your data in advance!
To Next Page
Loading...