54
MAINTENANCE
Close the filler cap and drain plug well and make sure there is no oil leak. Wipe away any drops or smears of oil
left from putting in the oil. Periodically check for leaks around the gasket of the crankcase cover.
Do not use the vehicle if the lubricant level is insufficient or the lubricant is dirty since this would accelerate
wear and tear of the moving parts and could lead to irreparable damage.
Amount of oil
Total quantity: 0,75L (0,79 US qt) (0,66 Imp. qt)
– Pour 750 cm of gear oil into the filling hole (2), see
(LUBRICANTS).
– Refit the filler cap (2).
– Start the vehicle, see (STARTING) and let it idle for a short
period to allow the gear oil to circulate.
– Check the oil level and top up if necessary.
2
1
To Next Page
Loading...
