73
MAINTENANCE
IT
EN
DE
FR
Adjustment dumper preload
(“Performance” models)
The basic setting of the suspension is done by FANTIC
MOTOR. If different use is required, the setting may be
customised.
It is advisable to wait for the engine to be completely
cold before making changes.
Adjust the spring preload according to the conditions of use
of the vehicle.
Do not force rotation of the adjusting devices beyond the
limit (in either direction) to avoid possible damage.
The settings for racing use are recommended at the time of organised competitions or sporting events to be held on circuits
cut off from road traffic and with the approval of the authorities having jurisdiction.
The ring nut adjustment (1) requires the removal of the air manifold and the use of a specific sector wrench.
– Loosen the locking ring nut (2) using the sector wrench.
– Using a hook wrench or an aluminium punch, turn the adjusting ring (1) to the desired position, reloading or not the
spring in relation to the weight and riding style.
– Tighten the retaining ring nut (2) again.
2
1
To Next Page
Loading...
