Fargo C50 - Page 57

C50 Card Printer Service Manual PLT-01278 rev 1.1
August 2013
Page 57
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
Step
Procedure
17
Procedure is complete after you set the new printhead resistance value.
18
Set the resistance of the new printhead in the Driver Toolbox.
19
Open the Toolbox to access Advanced Settings tab from the printer driver.
20
Open the Toolbox to access Advanced Settings tab from the printer driver.
21
Use the R=xxxx number from step 11. Add this number to the CURRENT box and click OK
to save OR proceed to the TOF, EOF or LOF adjustments below.