Fargo CUPS HDP5000 - Setting the Coercivity

additional information.
MagEncodingMode3 =
ISO
Magnetic Stripe
Encoding Mode
= ISO
Sets the Encoding Mode for the Print
job to ISO. See Sending ISO Magnetic
Encoding Information for additional
information.
MagEncodingMode3 =
JIS2
Magnetic Stripe
Encoding Mode
= JIS II
Sets the Encoding Mode for the Print
job to JIS II. See Sending JIS II
Magnetic Encoding Information for
additional information.
MagEncodingMode3 =
Raw
Magnetic Stripe
Encoding Mode
= Raw
Sets the Encoding Mode for the Print
job to RAW. See Sending ISO
Magnetic Encoding Information for
additional information.
Setting the Coercivity
Command Line Usage CUPS option Description
Coercivity = High Coercivity = High Sets the coercivity for magnetic
encoding to 2750 Oersted
Coercivity = Low Coercivity = Low Sets the coercivity for magnetic
encoding to 300 Oersted
HDP5000 Cups (Linux & MAC OS) User Guide Rev1.1
25