Fargo DTC4000 - Using the Advanced Settings tab

© 2010 HID Global Corporation All rights reserved
DTC1000/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.2)
49
Using the Advanced Settings tab
Use the Advanced Settings tab for adjusting the internal Printer settings, which are customized for
every Printer at the factory and saved directly within the Printer's memory. (Note: You can select the
Restore Defaults to restore the internal default settings.)
These change values for Firmware settings. See below.
• Setting Column: Displays label for setting
• Default Column: Displays default value for setting
• Current Column: Displays current value for setting
• Change the value by clicking on the value to activate spin control or type.
• Apply Button: Applies changed values.
• Restore Defaults Button: Restores default values.
• Enable Swift ID if using a USB connection.