© 2010 HID Global Corporation All rights reserved
DTC1000/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.2)
36
Printer Installed On Network
Perform this procedure for a Printer installed on a Network.
Step Procedure
1 Connect the Printer to the Network. (Note: It will take 5 to 10 minutes for the
Printer to assign an IP address in order to connect the Printer via an Ethernet
cable to the back of your PC versus a Network.)
2 Locate the IP address on your Printer and write it down.
3 Find the IP Address on a DTC4000.
a. Navigate through the Printer display to reach the IP address.
4 Find the IP Address on a DTC1000.
To Next Page
Loading...
Need help?
General
