Need help?Do you have a question about the Fargo DTC1000Me and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Connectivity | USB 2.0 |
| Print Technology | Dye sublimation |
| Card Capacity | 100 cards (input hopper), 30 cards (output hopper) |
| Card Types Supported | PVC or composite PVC |
| Card Sizes Accepted | CR80 (3.375 x 2.125 inches) |
| Card Thickness Accepted | 30 mil to 40 mil |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Essential safety guidelines, warnings, and ESD precautions for service.
Steps for detaching and removing the dual-sided printing module.
Procedures for replacing the printer's main logic board and LCD display.
Steps to remove the flipper covers and the dual-sided printing module.
Detailed procedure for replacing the printer's printhead.
To Next Page
