17
USE OF IMPLEMENTS
GRU FASSI
17 USE OF IMPLEMENTS
17.1 Generality
The crane in function of model, in load condition H1B3, can be provided with
implements such as:
- Manual extensions
- Winches
- Hydraulic extensions
- Personnel baskets
- Clam ‘shell buckets
- Augers
(!) ATTENTION (!)
When using an implement it is always necessary to check that its weight,
dimension and capacity is matched to the crane performances.
For further information please refer to FASSI GRU.
Warning and norms for crane use also apply for hydraulic implement use.
Before using a personnel basket it is necessary to provide the crane with the safety
devices requested by the local norms in force, EN280 in Europe, and prior to use of
the crane it has to be tested and inspected in accordance with the local legal requi-
rements.
(!) ATTENTION (!)
When the crane is fitted with implements or laid on the truck body it is neces-
sary to check they are locked to assure the impossibility of accidental move-
ments and that the led signalling maximum obstruction in height (if fitted) con-
firms the correct positioning of the crane.
(!) ATTENTION (!)
The crane can operate, intermittently and not continuously, with lifting
devices other than the hook, only on loose and light materials (not on
scrap iron).
(!) ATTENTION (!)
In case of using the crane with lifting devices other than the hook,
the access to the working area at the persons must be prevented.
The dimensions and the capacity of the implements must be proportio-
ned with crane performances.
(!) ATTENTION (!)
Crushing (F) or push (F) manoeuvres are not permitted.
To Next Page
Loading...