8 IDENTIFICATION OF THE CRANE MODEL
8.1 Generality
The exact crane model, serial number and description of implements will
enable FASSI Service Department to give a rapid and efficient response.
8.2 Crane mark
The CE indicates that the crane complies with the Machines
Directive (D.M.) 98/37; it can be considered effective only with a
written declaration of conformity enclosed.
The cranes with the CE mark and the capacity superior to 1000
kg and/or the lifting moment superior to 40KMm is supplied with
a lifting moment limiting device, that preserves the structure from
possible overloads.
Identification data are marked on the plate DE5891 used for the CE
mark (fig. 2) and rivetted on the base with personalized rivets FASSI.
1 - Crane model
2 - Serial Number
3 - Year of manufacturing
The crane must not be put into service within the European Community unless
the machine on which it is mounted also conforms with the prescribed Directive.
Ever change of use, modification or addition of accessories, not specified by this
manual must be affixed with a new CE mark in accordance with the Machinery
Directive.
A further metallic plate (fig. 3) fixed to the crane by the installer, quotes the
identifying data of the equipment and the final CE mark.
1 - Name of the installer who
applied the final CE mark
2 - Crane mark, model and
serial number
3 - Vehicle mark, model and
chassis number
4 - Year of mounting
(!) ATTENTION (!)
It is forbidden to alter the data marked on the plates.
8
IDENTIFICATION OF
THE CRANE MODEL
GRU FASSI
2
1
3
fig. 2
CRANE - MARK AND MODEL
SERIAL NUMBER
TRUCK - MARK AND MODEL
TRUCK FRAME SERIAL NUMBER
YEAR OF MOUNTING
2
3
1
4
fig. 3
To Next Page
Loading...