Removing the machine from the pallet
The cardboard enclosure can be removed by cutting through the plastic ties and
pulling the cardboard away from the p
allet wherever it is secured.
The machine comes wrapped in a preserving plastic film to protect the cast iron
tables and to secure some of the accessory boxes. Pull off the plastic film or carefully
cut through it, avoiding scratching the machine or cutting through any cables.
Cardboard boxes that sit on the pallet were stapled to the pallet whilst the box
was still open, so these should be emptied of their contents before pulling up the box,
this will avoid the contents falling through the bottom of the box when pulling the box
off full.
7.Taking Off
The Pallet
To Next Page
Loading...
