Universal Cleaner
Once the machine is assembled and ready to be checked for calibration, it should be
cleaned thouroughly to remove the various preserving oils that are left on the
machine. This will also ensure maximum
possible accuracy during the calibration
process and will allow test cuts to made under proper working conditions.
Once cleaned, surface protectants should be used to protect the machine against
corrosion and to aid various woodworking processes.
Disposable, strong paper towels are most appropriate for this job as they will end up
very dirty and greasy.
FELDER offer specialized cleaning fluids and treatments specifically for this purpose:
10.Cleaning
Ideal for cleaning new machines, the Universal Cleaner is a very strong cleaning
substance. It removes dirt, grease, and oil from treated surfaces in seconds. The
Universal Cleaner does not affect textiles, plastics, rubber or paint. It comes in a solid
spray container with
an adjustable nozzle; contents: 0,5 liter. The spray bottle can
be refilled with a convenient 3 liter container.
The Machine
Cleaning and Protecting the Machine
To Next Page
Loading...
