Need help?Do you have a question about the Felder Hammer and is the answer not in the manual?
Crucial safety checks and awareness before operating the machine; consult the Operation Manual.
Lists essential tools and materials for setting up and operating the Hammer machine.
Details specific tools and materials needed for performing essential machine checks.
Instructions on safely unpacking and removing the Hammer machine from its pallet packaging.
Guidance on constructing a ramp for safely moving the machine off its pallet.
Information on using a pallet jack for machine handling, including dimensions and precautions.
Details use of Universal Cleaner for removing oils and protecting surfaces on new machines.
Describes FELDER Cleaner for Plastics as an all-purpose detergent for various cleaning tasks.
Explains Harzlöser for removing resin from saw blades, tools, and machine elements.
Metall-Glanz protects metal surfaces from corrosion and is a long-term protectant.
Fluid for guidetracks and spindles, repels dust/chips, ensures slick movement.
Reduces timber resistance during shaping/planing, contains no residue.
Instructions for assembling extension tables, using diagrams and support members.
Guidance on installing the rip fence guide bar, aligning screws, and checking height.
Step-by-step instructions for assembling the sliding table to the machine chassis.
Checks for sawblade alignment, rip fence scale, shaper spindle alignment.
Tests for joiner test cuts, snipe, and planer thickness consistency.
Procedure for performing and checking a 5-sided cut on the machine.
Checks free-cut, centre locked, and end positions of the sliding table.
Verifies accuracy of crosscut fence scales and angled cut from outrigger.
Ensures saw blade and shaper spindle are correctly aligned at 90° and 45°.
Performs joiner test cuts, snipe checks, and planer thickness tests.
Details adjustments for sliding table free-cut, centre lock, and end positions.
Explains adjustments for crosscut fence position, scales, and angled cuts.
Guides adjustments for saw blade and shaper spindle angles (90°, 45°).
Covers adjustments for joiner test cuts, snipe, and planer thickness.
To Next Page
General
