For Making Basic Machine Checks:
Requirements listed by machine type:
For Saws;
Approx. 3ft x 3ft board (at least ½” thickness for ease)
Vernier calipers
Tape Measure
Precision square
45° Engineering Angle / Miter Gauge / Angle gauge
For Shapers;
Precision square
45° Engineering Angle / Miter Gauge / Angle gauge
For Joiner / Planers;
Approx. 3ft x 2” x 4” boards; 2 of
Vernier calipers
Feeler gauge
6.What You
Will Need
To Next Page
Loading...
