1. Foreword
This Machine Setup Guide is intended as an additional reference to the Operating
Manual that is provided with the machine, not as a substitute. Under no circumstance
should you use the machine without reading the Operation Manual first.
The correct operating procedures are described within the Operation Manual and
these must be rigidly adhered to, along with the guidelines described for safety. In
addition to this there is a si
gnificant amount of important information to be found in
the Operation Manual that is not covered by this Machine Setup Guide including
specific information for your particular machine. This Setup Guide is functional for a
variety of Hammer machines.
Safety First
Before every use of the machine, perform the safety checks that are detailed in the
Operation Manual for your particular machine. It is also important to understand that
even with all of the appropriate safety devices correctly installed, there are still risks
remaining. Any potential operators of the machine should be fully aware of these
risks and must also have read the Operation Manual before using the machine.
Never perform any adjustments to the machine with the tool running. Always switch
off the machine before making adjustments. Never work when you are tired and
always apply common sense to your working techniques in addition to those
techniques outlined in the Operation Manual.
©2005 HAMMER - Errors and modifications of technical data reserved at any time,
always use the safety devices provided with the machine.
To Next Page
Loading...
