**Feature not available in this Version**
This section contains all of the adjustments relevant to each of the machine
checks. At the top of each page, underneath the hammer logo, you will find an
Alignment link which will lead you directly to a description, with diagram(s) of the
alignment and what the corresponding setting should be within.
Before making adjustments to the machine, satisfy yourself that the way in which
you are checking the alignment is correct and does not itself include errors, which
would otherwise produce inaccurate measurements.
Help is always available if the information contained within this CD-ROM does not
help you.
Contact details can be found here
To Next Page
Loading...
