Fema C Series - Page 23

FEMA ELECTRÓNICA . Series C . C40-D
23
Setpoint
Hysteresis
Alarm typeAlarm 2
1.30 Full conguraon menu (cont.)
Memory of min.
Display hold
Memory of max.
External control
Decimal point 1
Decimal point 2
Decimal point 0
Second scaling
Decimal point 3
Disabled
Key UP
(fast access)
Memory of max.
Memory of min.
Setpoint 1
Setpoint 2
Degrees
degrees Celsius
degrees Fahrenheit
Temperature
resoluon
1º resoluon
0.1º resoluon
Second scaling
Decimal point
Display Low
Display High
‘Eco’ mode
5 to 255 seconds
Average lter
0 to 100
Steps
Oset reading
Opon 1
analog output
relay
disabled
Tools
Modbus RTU
the parameter ‘420’ gives
access to the calibraon
menu for the analog out-
put. See secon 2.2 for
more informaon.
Funcon ‘tare’
Funcon ‘tare’