39
When WiFi is on (as labeled in green box), use the ENCODER to scroll through available
networks; select a network by pressing the ENCODER on it.
A network can be accessed manually by scrolling to and selecting “ADD HIDDEN NETWORK,” and
entering characters by turning and pressing the ENCODER.
After choosing a network, select “CONNECT” from the menu shown by pressing the
ENCODER on it (other options on this menu are covered on page 40).
After selecting “CONNECT,” enter a password by turning and pressing the ENCODER to add each character.
When password is complete, press the PRESET LAYER button (corresponding with onscreen prompt “done”).
MENU
WiFi ON
NETWORK 1
NETWORK 3
NETWORK 2
back
MENU
ADD HIDDEN NTWK
NETWORK 3
NETWORK 2
NETWORK 1
back
MENU
CONNECT
FORGET
INFO
MODIFY
back
MENU
ENTER PASSWORD:
*******
back
MENU
ENTER PASSWORD:
A B C D E F G
done
To Next Page
Loading...
