AMP SETTINGS
“Amp Settings” is a MENU utility button function (see page 33) that enables quick and easy restoration of the
factory presets and amplier settings, in addition to cloud logout and rear-panel USB/line out functions. To
access these, press the MENU utility button, use the ENCODER to scroll to and select “AMP SETTINGS,” and
scroll to and select any of the ve options presented. These are:
RESTORE SETTINGS: For restoring original factory settings except for presets and Setlists. Use the ENCODER
to scroll to and select “YES” or “NO”.
RESTORE ALL: For restoring original factory settings including presets. Use the ENCODER to scroll to and
select “YES” or “NO”. Note that selecting “YES” will delete existing Setlists.
CLOUD LOGOUT: For logging out of the cloud when using Cloud Presets (see page 59). Use the ENCODER to
scroll to and select “YES” or “NO”.
LINE OUT/USB GAIN: Gain control for use when recording using the rear-panel line outputs or USB audio
port (see page 44). Turn and press the ENCODER to select a gain value.
LINE OUT OPTIONS: For conguring the rear-panel balanced line outputs (see page 44). Turn and press the
ENCODER to select “PRE/POST” (mono) or “STEREO” options.
Note that the “RESTORE ALL” function is also accessible as a start-up option detailed in the “Factory Restore
and Firmware Updates” section (see page 62).
57
To access the Amp Settings function, rst press the MENU utility button.
Use the ENCODER to scroll to and select “AMP SETTINGS.”
Use the ENCODER to scroll to and select one of the ve “Amp Settings” options.
MENU
TUNER
BLUETOOTH
PRESET ORGANIZER
SETLIST
CLOUD PRESETS
MENU
WIFI
GLOBAL EQ
FOOTSWITCH
AMP SETTINGS
ABOUT THIS AMP
MENU
LINE OUT/USB GAIN
RESTORE ALL
CLOUD LOGOUT
LINE OUT OPTIONS
RESTORE SETTINGS
back
To Next Page
Loading...
