BLUEHELIX MAXIMA
188 EN
cod. 3541U630 - Rev. 00 - 07/2020
Enable/Disable the heating function
By touching the control “A” (fig. 4 and fig. 5) it is possible to enable ( ) or disable ( ) heating.
fig. 4- Heating function active
fig. 5- Heating function not active
DHW temperature adjustment
Use the DHW icons (details 11 and 13 - fig. 6) to adjust
the temperature from a min. of 35°C to a max. of 55°C.
If little water is drawn off and/or with a high water
inlet temperature, the DHW outlet temperature
may differ from the set temperature.
fig. 6- DHW adjustment
Heating temperature adjustment
Use the heating buttons (details 12 and 14 - fig. 7) to
adjust the temperature from a min. of 20°C to a max.
of 80°C.
fig. 7- Heating adjustment
Room temperature adjustment with timer control
A
As far as possible, make all settings using the room temperature adjustment device. Regarding the timer, refer
to the relevant user manual.
ECO mode
The ECO mode minimizes energy consumption, but it may take longer for the DHW to reach the required temperature.
With the ECO mode disabled, the temperature of water inside the boiler is maintained, thereby ensuring immediate
availability of hot water.
ON
OFF
OFF
28.5°
ON
A
5.0°
OFF
32.5°
ON
(13) (11)
28.5°
ON
(14) (12)
To Next Page
Loading...
Need help?
General
