CMMS-AS-...-G2 – STO
Festo – GDCP-CMMS-AS-G2-S1-EN – 1306NH – English 3
Table of contents – CMMS-AS-...-G2 – STO
1 Safety and requirements for product use 7......................................
1.1 Safety 7..................................................................
1.1.1 General safety instructions 7.........................................
1.1.2 Intended use 7.....................................................
1.1.3 Foreseeable misuse 8...............................................
1.1.4 Achievable safety level, safety function in accordance with EN ISO 13849-1 8...
1.2 Requirements fo r produc t use 9...............................................
1.2.1 Technical requirements 9............................................
1.2.2 Qualification of the specialists (requirements for the personnel) 9............
1.2.3 Diagnostic coverage (DC) 9...........................................
1.2.4 Range of application and approval certificates 10..........................
2 Description of the safety function STO 11........................................
2.1 Product overview 11.........................................................
2.1. 1 Purpose 11........................................................
2.1.2 Interfaces 11.......................................................
2.2 Function and application 12....................................................
2.2.1 Description of the safety function STO 13................................
2.2.2 Overview of interfaces [ X1] and [X3] 15..................................
2.2.3 Runtime performance 16..............................................
2.3 Switching example STO – “Safe Torque Off ” 17....................................
2.3.1 Explanations of the switching example 17................................
2.3.2 STO request 18.....................................................
2.3.3 Restart after STO 19.................................................
2.3.4 STO timing diagram 20...............................................
2.4 Switching example S S1 – “Safe Stop 1” 21.......................................
2.4.1 Explanations of the switching example 21................................
2.4.2 Request SS 1 23.....................................................
2.4.3 Restart after S S 1 and S TO 24..........................................
2.4.4 Timing diagram SS1 25...............................................
2.4.5 Parameterisation example 26..........................................
2.5 Testing the safety function 27..................................................
3 Assembly and installation 28..................................................
3.1 Mounting / dismantling 28.....................................................
3.2 Electrical installation 28.......................................................
3.2.1 Safety instructions 28................................................
3.2.2 Ports [X1] and [X3] 29................................................