A Technical appendix
Festo – GDCP-CMMS-AS-G2-S1-EN – 1306NH – English 37
A.1.2 General, operating and environmental conditions CMMS-AS-...-G2
The complete tec hnical data on CMMS-AS-...-G2 can be found in the Hardware descrip-
tion, GDCP-CMMS-AS-G2-HW-... Ta b. 1.
Please observe the restrictions of the environmental conditions, specifically the required
output nominal power
General technical data
Approval c ertificates
CE marking (see declaration of
conformity)
in accordance with EU Machinery Directive 2006/42/EC
in accordance with EU Low Voltage Directive
in accordance with EU EMC Directive
The device is intended for use in an industrial environment.
Measures for interference suppression may need to be
implemented in residential areas.
Tab. A.3 Technical data, general
Operating and environmental conditions
Permissible setup altitude above sea level
at nominal power [m] 1000
with power
reduction 10%
each 1000 m
[m] 1000 … 2000
Air humidity [%] 0 … 90 ( non-condensing)
Protection class IP20
Degree of contamination in
accordance with EN 61800-5-1
2
Ambient temperature [°C] 0…+50
Storage temperature [°C] –25 … + 70
Vibration and shock resistance
Operation in accordance with EN 61800-5-1, section 5.2.6.4
Transport in accordance with EN 61800-2, section 4.3.3
Tab. A.4 Technical data: Operating and environmental conditions
To Next Page
Loading...
Need help?
General
