Festo Controller CECC User Manual

Festo Controller CECC
63
Command Comment
reboot Reboots the device.
getrtc Shows the current real-time clock data.
setrtc YYYY-mm-dd-HH:MM:SS Sets the current real-time clock data
Example: setrtc 2011-01-25-15:13:26
canlog Functions for CAN logging.
Use the /? option to display the possible parameters.
cangetconfig Shows the current CAN configuration parameters.
cansetconfig Sets the CAN configuration parameters.
Use the /? option to display the possible parameters.
usbgetconfig Shows the current USB configuration parameters.
usbsetconfig Sets the USB configuration parameters.
Use the /? option to display the possible parameters.
shellcmd <linux command> Executes a Linux shell command
Examples: shellcmd cat /proc/config/id
Table: PLC shell commands
A list of all the commands for the device in the active path can be called up by entering a question
mark "?" (without quotation marks) in the command line of the PLC shell.

Festo Controller CECC Specifications

General

Brand	Festo
Model	Controller CECC
Category	Controller
Language	English