Festo Controller CECC
3
1.3.3 Further conventions
[File] [New Project...] Menu items are framed in square brackets, e.g. you can create a new project
using the [New Project...] command in the [File] menu.
"OK"
Project," "OK" as well as designations are shown in inverted commas.
CTRL Names of keys on the PC keyboard are represented in the text with uppercase
letters (e.g. ENTER KEY, CTRL, C, F1, etc.).
CTRL+C For some functions you need to press two keys simultaneously. For example,
press and hold down the CTRL key and also press the C key. This is written in the
text as CTRL+C.
If "click" or "double-click" is mentioned, this always applies to the left-hand mouse
button. If the right-hand mouse button is to be used, this will be explicitly
mentioned.
1.4 Version information
The manual refers to the following versions:
– Festo controller CECC – firmware version 1.3.4.0 and later
– CODESYS V3 provided by Festo (pbF) software package
The manual contains information on the function of the CECC as well as its assembly, installation and
commissioning.
Further information on the device can be found in the following documents:
Title Type Description
Controller CECC Brief description Connection and display components, assembly,
installation and technical data.
Festo_CECC_3.library Online Help Configuration, use and error diagnosis in function
blocks.
Festo_CECC_IOLink_3.library
Festo_EasyIP_3.library
Festo_Motion_3.library
Festo_CVE_3.library
Festo_CameraControl_3.library
Festo_SerialComEx_3.library
Festo Field Device Tool Online Help Servicing and commissioning of Ethernet-based
Festo devices.
To Next Page
Loading...
Need help?
General
