2.1 Overview
Output module CP-A08...-M12 makes available in the
CP system 8 universally usable digital outputs for actu-
ating low current consuming devices (e.g. bulbs, further
valves etc.). The following diagram shows the display
and connecting elements on the output module.
1
2
3
4
Designation for output type
- OUTPUT-P for PNP outputs
- OUTPUT-N for NPN outputs
CP connection
Connections for actuators
Yellow LED for status display
(one LED per output)
5
6
7
8
9
0
Status LED (green)
Load voltage connection
Protective cap
Recess for inscription signs (IBS 6x10)
Functional earthing
Type plate
Fig. 2/1: Display and connecting elements
3
4
5
6
7
8
0
1
2
2. Output module type CP-A08...-M12
CP-A08...-M12 9611A 2-3
To Next Page
Loading...
