Project", "OK" as well as designations are shown in inverted commas.
<Your connection> Placeholders for names/designations, e.g. "Status of <Your connection>", are
shown in angle brackets.
CTRL Names of keys on the PC keyboard are represented in the text with uppercase
letters (e.g. ENTER KEY, CTRL, C, F1, etc.).
CTRL+C For some functions you need to press two keys simultaneously. For example,
press and hold down the CTRL key and also press the C key. This is written in the
text as CTRL+C.
If "click" or "double-click" is mentioned, this always applies to the left-hand mouse
button. If the right-hand mouse button is to be used, this will be explicitly
mentioned.
1.4 Version information
The manual refers to the following versions:
– Codesys controller CPX-CEC-...-V3 Revision 01 and later
– CODESYS V3 pbF programming environment with CPX-CEC package
The manual contains information on the function of the Codesys controller as well as its assembly,
installation and commissioning.
Further information on the device can be found in the following documents:
Title Type Description
Controller CPX-CEC-...-V3 Brief
description
Connection and display components, assembly,
installation and technical data.
Festo_CameraControl_3.library Online Help Configuration, use and error diagnosis in function
blocks.
Festo_CPX-CMAX_3.Library
Festo_CPX_3.library
Festo_CVE_3.library
Festo_EasyIP_3.library
Festo_FHPPMAX_3.library
Festo_General_3.library
Festo_Motion_3.library
Festo_SerialComEx_3.library
Festo Field Device Tool Online Help Servicing and commissioning of Ethernet-based
Festo devices.
General basic information on the method of operation, on fitting, installing and commissioning
CPX terminals can be found in the CPX system manual P.BE-CPX-SYS-...
Refer also to the user documentation for the components used in the CPX terminal.
4
To Next Page
Loading...
Need help?
General
