Name: FIBARO ROLLER SHUTTER 3
Brand: FIBARO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Menu allows to perform Z-Wave network actions. In order to use the

menu:

1. Switch o the mains voltage (disable the fuse).

2. Remove the device from the wall switch box.

3. Switch on the mains voltage.

4. Press and hold the B-button to enter the menu.

5. Wait for the LED to indicate the desired menu position with colour:

• WHITE - start calibration

• GREEN - reset energy consumption memory

• VIOLET - start range test

• YELLOW - reset the device

6. Quickly release and click the B-button again.

#8: Menu

Other manuals for FIBARO ROLLER SHUTTER 3

Questions and Answers:

Need help?

Do you have a question about the FIBARO ROLLER SHUTTER 3 and is the answer not in the manual?

General

Device Type	Roller Shutter Controller
Protocol	Z-Wave
Radio Protocol	Z-Wave
Dimensions	42.5 x 38.25 x 20.3 mm
Mounting Box Requirements	Ø ≥ 50mm, depth ≥ 60mm
Protection Class	IP20
Maximum Load for AC Output	4.2A
Max Transmit Power	up to 6 dBm
Range	Up to 50m (open space)
Operating Temperature	0°C to 40°C
Z-Wave Frequency	868.4 MHz EU
Compatibility	Works with various Z-Wave and Z-Wave Plus certified devices
Radio Frequency	868.4 or 908.4 or 921.4 MHz EU frequency band